LAVA Stock Rom installation

Step 1 - Download Stock Firmware.(Be carefull or you will flash wrong Firmware)
To download firmware i will redirect you to this link......
http://support.moulnisky.com/index.p...re%20Versions/

Step 2 - Download and install Drivers...
http://sapamau.us/watch/rar/JQ7hLpkP...1_DRIVER.xhtml

Step 3 - Download and install Adb Drivers Here....
https://drive.google.com/uc?id=0B3qY...UhjSFJBOVZwbFk

Step 4 - Download and extract Broadcom Download Firmware Utility Here....
https://drive.google.com/uc?id=0B3qY...01YSTdJaldKWDg

Step 5 - Power Off your android device.

Step 6 - Open DFU.exe (extracted in Step 4)

Step 7 - Once Broadcom Download Firmware Utility (DFU) is launched, Click on the browse button From the top right and locate the firmware folder.


Step 8 - Once you have successfully located the DFU compatible firmware folder then it will be automatically Seen in the Broadcom Download Firmware Utility (DFU) tool.


Step 9 - Once Firmware is added successfully in DFU tool, then Tap on the Download Menu.


Step 10 - Now, Click on Start button to begin the flashing.


Step 11 - Now, connect your Broadcom Chipset based Android Smartphone to the computer (make sure it Is in Power Off)

Step 12 - After Connecting your device to the computer, Press Volume UP or Down Button on your Device so that DFU can detect it.(If it is not detected automatically).

Step 13 - Once Broadcom Download Firmware utility (DFU) will detect your device, the Flashing process will begain automatically.


Step 14 - Once Flashing is completed, a Finish message will appear.

Step 15 -Now, close Broadcom Download Firmware utility application and disconnect your Android Device From the computer.

Congratulations, Now your Android Device is successfully running the Stock Rom you have Downloaded.